|
Access Systems: Milgo Products |
Jump to:
TimePlex Products |
|
| Excalibur® DAP 6456 Digital
Access Product
|
 |
Specifically designed to provide router WAN access for
non-mission critical applications - operates at 56 Basic DDS or Clear Channel 64 Kbps
service, V.35 DTE interface
|
| Excalibur® Dial Restoral System
Network Backup System
|
 |
Designed for dial back-up of multidrop applications; Can
also be used point-to-point applications; EDRS uses V.32 bis, 4-wire Switched 56, or ISDN
BRI dial back-up resources
|
| Excalibur® ISX 5311 T-1 CSU/DSU
with SNMP
|
 |
Full-featured single port T-1 DSU/CSU - available with an
asynchronous PPP/SLIP or an Ethernet (10BaseT) SNMP interface
|
| Excalibur® ISX 5312/5314 T-1/E-1
Multiplexers with SNMP
|
 |
Intelligent T-1 and E-1 multiplexers with full and
fractional T1/E1 compatibility. Available with 2 or 4 DTE ports; asynchronous PPP/SLIP or
an Ethernet (10Base-T) SNMP interface
|
| Excalibur® Multiport DAP Digital
Access Product
|
 |
Multiport/multidrop allows up to 6 different protocols to
run data over single multidrop phone line - port 1 configurable for RS-232 or V.35 - all
other ports are RS-232 only - available in standalone or central site models
|
| Excalibur® Multirate DAP Superior
Digital Access
|
 |
Point-to-point network configurations for efficiency and
economical performance. Connects bridges, routers and other Data Terminal Equipment (DTE)
via dedicated Basic DDS or Clear Channel 64Kbps services. Operates at speeds of 2400,
4800, 9600, 19200, 56 and 64Kbps
|
| Excalibur® T-1 CSU Channel
Service Unit
|
 |
T-1 CSU housed in the Excalibur Card Carrier.
Available with one or three network interfaces. Transmits data from up to 24 digital
or analog circuits over a single full or fractional T-1 link
|
| Excalibur® Multirate SET-1 DAP
Digital Access Product
|
 |
Singleport digital access product housed in the Excalibur
Card Carrier. Connects to internal Excalibur T-1 CSU or external T-1 multiplexer via
two high-speed TDM busses on the Excalibur Card Carrier backplane. In a single-ended
T-1 (SET-1) application, data from up to 24 digital circuits is transmitted over a single
full or fractional T-1 link. The network demultiplexes the data and distributes it
to remote units over DDS or Clear Channel 64 Kbps lines
|
| Excalibur® Multiport SET-1 DAP
Digital Access Product
|
 |
Six-port digital access product housed in the Excalibur
Card Carrier. Connects to internal Excalibur T-1 CSU or external T-1 multiplexer via
two high-speed TDM busses on the Excalibur Card Carrier backplane. In a single-ended
T-1 (SET-1) application, data from up to 24 digital circuits is transmitted over a single
full or fractional T-1 link. The network demultiplexes the data and distributes it
to remote units over DDS or Clear Channel 64 Kbps lines
|
| Excalibur® Card Carrier
High-Density Chassis
|
 |
Houses Excalibur family communications products. Each
chassis can house up to 16 single-card devices. Master control panel provides
single-point control over all installed devices
|
|
Access
Systems: TimePlex Products |
Jump to:
Milgo Products |
| SYNCHRONY® IAN-150
|
 |
| SYNCHRONY® AD-10/FR2
|
 |
TRANSPORT MODELS
- Transport Model 2000
- Transport Model 3000
- Transport Model 3030/3060
- Transport Model 3101/3102
|
|
|
|
