Products Home

By Brand/Label:
  Milgo
  TimePlex

By Technology:
  Access Systems
  Broadband Systems
  Network Management
  Software Solutions
  Switching Systems

By Name


Product Manuals


Year 2000

Withdrawals

Retired From Maintenance

Contact Us



Get Acrobat Reader
to view Data Sheets
and Manuals


Broadband Systems: Milgo Products

Jump to:
TimePlex Products

PremNet Broadband Access Systems

The PremNet Broadband Access systems utilizes reliable, private fiber, SONET/SDH or T3 circuits for high-speed backbone transport of LANs, data, voice, and video traffic between PremNet nodes. Communication between nodes is executed over a 100 to 155 Mbps fiber-optic data link, depending on the type of link modules (and up to 200 to 310 Mbps with dual rings). Communication can also be accomplished by a T3 coaxial cable link at 45 Mbps. The connection schemes of these links determines the network architecture.

The PremNet system multiplexes diverse data protocols and then transports them to the next node in the system. The data is demultiplexed and either distributed to the devices attached to the node or passed on to the next node in the system, thereby establishing virtual connections.

PremNet™ 5000

PremNet 5000 system consists of a PremNet™ 5000 Chassis configured with common modules and up to eight interface modules. Designed to provide transparent transmission of information between nodes in a Wide Area Network (WAN).

Modules include: link modules, switch modules, network management modules (NMM and ENMM), and power supply modules. Interface modules are used to transport different types of data through the system.

PremNet™ Network Management Modules

Provide complete network management for the high-speed PremNet broadband access system. Two versions: Standard NMM-E2A with E2A alarm telemetry support, and Enhanced NMM (ENMM) with E2A alarm telemetry and SNMP support.

PremNet™ Unilink Link Modules

Creates backbone connection and enables communication between nodes at 100 Mbps rate over 20 TDM timeslots. Supports: singlemode and multimode fiber, LED or laser transmitters, single-ring, multi-ring, and dual main ring network configurations.

PremNet™ Ethernet Interface Modules

Provides full bandwidth (10 Mbps) IEEE 802.3 Ethernet remote connectivity between Ethernet segments or networks connected to the PremNet system. Two models; non-filtering bridge or filtering bridge.

PremNet™ Token Ring Interface Modules

Provides full long-distance connectivity between Token Ring networks connected to the PremNet system. Allows connection to remote Token Ring networks across the PremNet backbone at native speed. Provides a "virtual" LAN, even though the actual devices on this "LAN" can be separated by distances up to 50 km.

PremNet™ Synchronous/Asynchronous Modules

Transparent transport of RS-422 or V.35 traffic across campus or metropolitan area network - (RS-422) Four DB-25 ports; software-configurable data rates from 56 Kbps to 2048 Kbps on each port - (V.35) Four Winchester (M34) ports; software-configurable data rates up to 2048 Kbps on each port DCE or DTE interface, with DDS option.

PremNet™ Voice Modules

Transparent transport of bipolar digital telephony signal across campus or metropolitan-area networks. There are three versions of T1/E1 and two versions of 4-wire.

Broadband Systems: TimePlex Products

Jump to:
Milgo Products

SYNCHRONY® CX-1500/CX-1540 cx-1500
SYNCHRONY® TX-3

Copyright © 2000 - All rights reserved.