SYNCHRONY® IAN-150
Technical Specifications Packaging:
 Desktop and rack mountable

 Architecture:
 Basic Units
 IAN-150-011: 1 Ethernet, 1 Serial
 IAN-150-012: 1 Token Ring, 1 Serial
 IAN-150-013: 3 Serial
 IAN-150-014: 1 Ethernet, 3 Serial
 IAN-150-015: 1Token Ring, 3 Serial
 IAN-150-016: 1 Ethernet, 1 Token Ring, 3 Serial

 Expansion Options
 IAN-EXP-01: 2 Serial ports (up to 2.048 Mbps)
 IAN-EXP-02: 1 port ISDN BRI/S (2B+D)
 IAN-EXP-03: 1 Ethernet port
 IAN-EXP-04: 1 Token Ring port (4/16 Mbps)
 IAN-EXP-05: 1 Serial port
 IAN-EXP-06: 1 56/64 k DSU/CSU port
 IAN-EXP-07A: 2 FXS ports
 IAN-DB-FXS-2: 2 FXS ports
 IAN-DB-E&M-2: 2 E&M ports (Type I, II, & V)
 IAN-DB-DSP-1A: DSP card (support for 4 voice channels with G-729A and G-723 licenses)
 IAN-DB-ISDN-U: 1 port ISDN BRI/U (1 64 k B-channel)
 IAN-DB-ISDN-S: 1 port ISDN BRI/S (1 64 k B-channel)
 IAN-DB-DDS: 1 56/64 k DDS Port

 Capacity
 Ethernet Ports: Up to 2 10BASE-T
 Token Ring Ports: Up to 2-UTP (RJ45)
 Data I/O Ports: Up to 7 (can be any mix of local or network ports)
 1 ISDN BRI "U" or "S" 
 1 56/64 kbps DSU/CSU
 Serial port support via interface module (WPM);
 Wide-Area Personality Module, in the following configurations:
 

  V.28 DTE (EIA-232)
  V.28 DCE (EIA-232)
  V.35 (DTE only DCE Interface is supported via a crossover cable)
  V.11 (DTE only*; EIA-449,
  EIA-422, and X.21)
  MIL-STD-188

 Memory
 5 MB of Flash memory and 16 MB of DRAM memory (standard on the motherboard)

 Wide Area Protocols:
 Frame Relay (UNI/NNI and EXPRESS SWITCHING)
 X.25 (Access & Switching)
 Integrated ISDN BRI (NI-1, NET3, and French variant of NET3)
 PPP (Async. & Sync. With PAP)
 Integrated 56/64 kbps DSU/CSU

 Protocols Supported:

  Network Layer Protocols
  TCP/IP, IPX

  IP Stack Protocols
  ARP, UDP, Proxy ARP, BOOTP, DHCP, IGMP

  Routing Protocols
  OSPF, RIP, EGP, IPX OC, IPX SAP, DLSw, DVMRP

  Legacy Protocols
  SNA/SDLC/QLLC, Asynchronous, 3270 BSC, Burroughs Poll Select, Bit Oriented Protocols,
  Character Oriented Protocol, SDLC-to-LLC conversion, SDLC-TPAD and HPAD, FRF.3 (BNN;
  Routed Mode RFC1490 and BAN; Bridged Mode RFC1490), X.3, X.28, X.29, and X.25

  Bridging Support
  Transparent
  Source Route
  Translational
  Spanning Tree (STA/P)
  BRE2

  Network Management Support Protocols
  SNMP
  Remotely via TELNET
  Locally via ASCII terminal
  TFTP
  HTTP

 Size
 Desktop dimensions:
  Height: 1.93 in (4.9 cm)
  Width: 19 in (48.3 cm)
  Depth: 13.3 in (33.8 cm)
  Weight: 11 lbs. (5 kg)

 Power Requirements:
 Voltage: 90-132/180-264
 VAC Auto-Sensing
 Frequency: 47-63 Hz
 Current: .5/.25 amp
 Power: 30 watts
 Heat Dissipation 615 BTU/hour

 Environmental Requirements:
 Ambient operating temperature from 0° to 45° C
 Relative humidity: 10% to 90% (-10° C to 28° C- non-condensing)
 Altitude to 10,000 ft (3050 m)

 Regulatory Approvals:
 EMC
 FCC part 15, Subpart B, Class A (US & Canada)
 EN55022 Class A, CISPR22 (Europe) VCCI (Japan)
 Immunity Test (IEC1000-4-2, and IEC 1000-4-3, and IEC 1000-4-4) (Europe)

 Safety
 UL1950 (UL-C included)
 EN60950 (TUV Rhineland GS-Germany)

 Telcom
 FCC Part 68 (US)
 IC CS-03 (Canada)
 CTR1/NET1, CTR2/NET2, CTR3 (Europe)
 
 
 

Product Highlights & Overview
Manuals | MIBs